Overview

FP series fan coil air conditioner is mainly composed of fan, motor, heat exchanger (coil), condensate tray, housing and controller, which is suitable for centralized air conditioning system. Due to the low noise and flexible temperature adjustment of the fan coil produced by our company, it is widely used in hotels, guesthouses, apartments, restaurants, hospitals, commercial office buildings and other places.

Parameter

Model	British model		FC200	FC300	FC400	FC500	FC600	FC800	FC1000	FC1200	FC1400
	Standard model		FP-3.5	FP-5.0	FP-6.3 7.1	FP-8	FP10	FP-12.5 14	FP-16	FP-20	FP-25
	National standard model		FP-34	FP-51	FP-68	FP-85	FP-102	FP-136	FP-170	FP-204	FP-238
Air volume(m³/h)		High	340	510	680	850	1020	1360	1700	2040	2380
		Medium	255	383	510	638	765	1020	1275	1530	1785
		Low	170	255	340	425	510	680	850	1020	1190
Cooling capacity(W)		High	1800	2700	3600	4500	5400	7200	9000	10800	12800
		Medium	1620	2440	3290	4120	4850	6550	8190	9730	11580
		Low	1310	2010	2650	3320	3900	5300	6610	7860	9350
Heating(W)		High	2700	4050	5400	6750	8100	10800	13500	16200	18900
		Medium	2350	3520	4530	6040	6850	9260	11740	14140	16360
		Low	1620	2470	3130	4170	4740	6500	8180	9710	11290
Cold water supply and return temperature							7℃-12℃
Hot water supply temperature			60
power supply			AC220V/50Hz
Heat Exchanger	Type		Copper tube series aluminum sheet, sheet spacing 2 . 2 mm
	Water supply		324	482	655	814	936	1276	1602	1915	2178
	Water resistance(kPa)		30	30	30	30	40	40	40	40	50
	pressure		1.6MPa
Low static pressure unit		input power(W)	37	52	62	76	96	134	152	189	228
Low static pressure unit		Motor Power(w)	8	12	18	22	32	20x2	25x2	35x2	42x2
High static pressure unit	Static Pressure 30Pa	input power(W)	44	59	72	87	108	156	174		253
	Static Pressure 30Pa	Motor Power(w)	10	18	22	30	40	25x2		2	60x2
	Static Pressure 50Pa	input power(W)	49	66	84	100	118	174	38	250	300
	Static Pressure 50Pa	Motor Power(w)	16	22	30	40	50	35x2	42x2	60x2	75x2
Number of fans			1	2	2	2	2	3	4	4	4
dB(A)		Low static pressure unit	≤37	≤39	≤41	≤43	≤45	≤46	≤48	≤50	≤52
		High static pressure30Pa	≤40	≤42	≤44	≤46	≤47	≤48	≤50	≤52	≤54
		High static pressure 50Pa	≤42	≤44	≤46	≤47	≤49	≤50	≤52	≤54	≤56
Take over specifications		Inlet and outlet pipes	ZG3/4"internal thread
Take over specifications		Condensate pipe	ZG3/4"External thread

Model	FP-34	FP-51	FP-68	FP-85	FP-102	FP-136	FP-170	FP-204	FP-238
Applicable area	8m²	12m²	18m²	22m²	26m²	30m²	36m²	45m²	60m²

Advantage

Beautiful appearance and corrosion resistance - using galvanized sheet produced by Baosteel, no zinc flowers, not easy to oxidize the surface, strong corrosion resistance. No welds, the overall appearance is beautiful and generous. The water pan slope design has no condensation - the water pan is formed by one-time integral stamping and processing, with a slope towards the water outlet. Both sides of the steel plate are pickled and phosphated, and then electrostatically sprayed, which is not easy to leak. The surface is covered with flame-retardant insulation materials to completely eliminate surface condensation.
High heat exchange efficiency - the coil adopts a seamless copper tube string aluminum fin structure, the aluminum sheet adopts a louvered skylight type slotted fin, copper tube +9.52, and high-quality hydrophilic aluminum foil is selected. Through hydraulic or mechanical expansion tube, ensure that the aluminum sheet and the copper tube are closely combined, and the heat exchange efficiency is increased by 10%. The unit test pressure is 1.6Mpa to ensure no leakage.
Ultra-low noise - the core component of the coil adopts a hot-dip galvanized multi-blade centrifugal fan that conforms to the principles of aerodynamics. After strict dynamic and static balance testing, the unit runs smoothly and the noise is lower than the national standard.
80,000 hours of trouble-free operation - the motor adopts a 110-type 24-slot copper core motor, the motor bearing is moisture-proof and sealed, no lubricating oil is required, and it is equipped with an overheating protection device. The temperature rise is low, and the motor runs stably without any special circumstances.
The DC variable frequency fan coil unit adopts a DC brushless motor, which is close to perfect in noise when running at low speed, and the operating power is 1/3 of that of ordinary fan coil units. Randomly configured with a brand thermostat, intelligent control and monitoring of indoor temperature and humidity.

62249d894092024d418b126b08ad007

202409021102341

.jpg

(1).jpg

product-907-456

FAQ

Q: How to place an order?

A: You can place an order by contacting any of our sales representatives. Please provide detailed information about your requirements as clearly as possible. This will enable us to send you a quotation promptly. For design discussions or further details, it is preferable to contact us via WeChat, QQ, or other instant messaging methods to avoid any delays.

Q: What are your delivery terms?

A: We accept EXW, FOB, CFR, CIF, etc. You can choose the option that is most convenient or cost-effective for you.

Q: What certifications do you have?

A: We have CE, ROS, and ISO9001, ISO14001 certifications.

Q: Do you have testing and auditing services?

A: Yes, we can assist in obtaining specified product test reports and designated factory audit reports.

Q: What are your shipping services?

A: We provide vessel booking, cargo consolidation, customs clearance, preparation of shipping documents, and bulk delivery at the port of shipment.

Q: What are your delivery terms?

A: Our regular delivery term is FOB Shanghai. We also accept EXW, CFR, CIF, DDP, DDU, etc. We will provide you with the freight, and you can choose the most convenient and effective one for you.

Hot Tags: concealed horizontal fan coil unit, China concealed horizontal fan coil unit manufacturers, suppliers, factory, buyer s choice fan coil unit, wholesale fan coil unit, Ceiling Mounted Fan Coil Unit, noiseless operation fan coil unit, modern fan coil unit, steady operation fan coil unit