Overview

A Four Pipe Fan Coil Unit is an efficient HVAC (Heating, Ventilation, and Air Conditioning) terminal device, widely used in various types of buildings such as office buildings, hotels, hospitals, shopping malls, etc. It regulates indoor temperature by providing cold or warm air through a fan and coil system. Below is a detailed introduction to the Four Pipe Fan Coil Unit.

Parameter

Model	British model		FC200	FC300	FC400	FC500	FC600	FC800	FC1000	FC1200	FC1400
	Standard model		FP-3.5	FP-5.0	FP-6.3 7.1	FP-8	FP10	FP-12.5 14	FP-16	FP-20	FP-25
	National standard model		FP-34	FP-51	FP-68	FP-85	FP-102	FP-136	FP-170	FP-204	FP-238
Air volume(m³/h)		High	340	510	680	850	1020	1360	1700	2040	2380
		Medium	255	383	510	638	765	1020	1275	1530	1785
		Low	170	255	340	425	510	680	850	1020	1190
Cooling capacity(W)		High	1800	2700	3600	4500	5400	7200	9000	10800	12800
		Medium	1620	2440	3290	4120	4850	6550	8190	9730	11580
		Low	1310	2010	2650	3320	3900	5300	6610	7860	9350
Heating(W)		High	2700	4050	5400	6750	8100	10800	13500	16200	18900
		Medium	2350	3520	4530	6040	6850	9260	11740	14140	16360
		Low	1620	2470	3130	4170	4740	6500	8180	9710	11290
Cold water supply and return temperature							7℃-12℃
Hot water supply temperature			60
power supply			AC220V/50Hz
Heat Exchanger	Type		Copper tube series aluminum sheet, sheet spacing 2 . 2 mm
	Water supply		324	482	655	814	936	1276	1602	1915	2178
	Water resistance(kPa)		30	30	30	30	40	40	40	40	50
	pressure		1.6MPa
Low static pressure unit		input power(W)	37	52	62	76	96	134	152	189	228
Low static pressure unit		Motor Power(w)	8	12	18	22	32	20x2	25x2	35x2	42x2
High static pressure unit	Static Pressure 30Pa	input power(W)	44	59	72	87	108	156	174		253
	Static Pressure 30Pa	Motor Power(w)	10	18	22	30	40	25x2		2	60x2
	Static Pressure 50Pa	input power(W)	49	66	84	100	118	174	38	250	300
	Static Pressure 50Pa	Motor Power(w)	16	22	30	40	50	35x2	42x2	60x2	75x2
Number of fans			1	2	2	2	2	3	4	4	4
dB(A)		Low static pressure unit	≤37	≤39	≤41	≤43	≤45	≤46	≤48	≤50	≤52
		High static pressure30Pa	≤40	≤42	≤44	≤46	≤47	≤48	≤50	≤52	≤54
		High static pressure 50Pa	≤42	≤44	≤46	≤47	≤49	≤50	≤52	≤54	≤56
Take over specifications		Inlet and outlet pipes	ZG3/4"internal thread
Take over specifications		Condensate pipe	ZG3/4"External thread

Advantages

Independent Control: Cold and hot water systems operate independently, allowing simultaneous cooling and heating in different areas, providing high flexibility.
High Comfort: Allows precise indoor temperature adjustment, avoiding the delay in switching between heating and cooling in traditional two-pipe systems, thus improving indoor comfort.
Energy Saving and Environmental Protection: Automatically adjusts fan and water flow, effectively reducing energy consumption and saving energy.
Wide Applications: Suitable for places that require precise temperature control and independent adjustment, such as high-end office buildings, hotels, hospitals, etc.